Tecto RF WSF2 - Sets for frozen goods

Refrigeration units for frozen goods in split design enable an uncomplicated handling even with large amounts of waste heat. By separating the evaporator and condensing unit, a wide range of installation options can be implemented on the inside and outside walls of a building.

Frozen Goods

	WSF2 1800	WSF2 2600	WSF2 3900	WSF2 4500
Cooling capacity [W]¹	1800/1500	2600/2200	3900/3300	4500/3800
Room volume up to [m³]²	15	30	50	60
Cold room temperature adjustment range [°C]	-25 to -5	-25 to -5	-25 to -5	-25 to -5
Allowed ambient tem-perature [°C] ³	-15 to +43	-15 to +43	-15 to +43	-15 to +43
Refrigerant / GWP ⁴	R449A/1282	R449A/1282	R449A/1282	R449A/1282
Sound pressure level day / night [db/A] ⁵	39/36	40/37	40/37	41/38
Voltage / Phases / Frequency (V/-/Hz)	400/3/ 50	400/3/50	400/3/50	400/3/50
Defrosting type	Electrical	Electrical	Electrical	Electrical
Dimensions condensing unit HxWxD [mm]	840x1030x425	840x1030x425	840x1030x425	840x1030x425
Dimensions evaporator HxWxD [mm]	455x752x430	455x752x430	455x1212x430	455x1212x430

¹ Condensing unit; evaporation temperature t₀ -30°C, ambient temperature + 32°C / 43°C; evaporator superheat 10K; influences of installation location and other refrigeration circuit components must be considered independently

² Basis of calculation for room size: room temperature -21°C, ambient temperature +25°C, heat extraction from goods 15K, operating time 16 h/day, goods handling 1/7 per day, inspection and lighting 0.5 h / day

³ Max. compressor inlet superheat 20K

⁴ Based on AR5 / IPCC

⁵ Condensing unit, A-weighted equivalent sound pressure level at 10m distance in DBA

Tecto RF WSF2 - Sets for frozen goods

Key benefits

TectoRefrigo Refrigeration Units brochure